Short Chain Amines

These amines are used as Epoxy Hardners & used in the manufacture of products likeGlibenclamide, Glimeparide, Glipizide, & Phenformin (Anti- Diabetic drugs)
Pyrantel Pamoate and Morentel Citrate (Anti Helminthic drugs)

These are also used in  Cobalt Phthalocyanine Pigments, Cocoamido Betaine (Shampoos),Adhesives & Curing Epoxy Resins
Prepolymer Hardner for Epoxy Resins which are resistant to Acids & Alkalies.
and as Epoxy Curing Agent

1) 3-(DIMETHY AMINO)- PROPYL AMINE

Synonyms : 1-Amino-3-dimethylamino propane; N,N-dimethyl-N-( 3 aminopropylamine ); Dimethyl -1,3 propane diamine.
Appearance : Transparent Liquid
Emperical Formula : C5H14N2
Structural Formula : CH3
-N-CH2-CH2-CH2-NH2
CH3
CAS No. : 109-55-7
Molecular Weight : 102.2
Physical Properties : Specific Gravity 0.812
Boiling Point 134 to 136 o C
Freezing Point <-50o C
Solubility in Water Miscible
Flash Point (COC) 15o C
Specifications : Purity by GC 99.0 % min.
Moisture by K. F. 1.0 % max.
Standard Packing (Kgs.) : 160
Applications : Used in the manufacture of Cocoamido betaine and as epoxy hardner and in the manufacture of Cobalt Phthalocyanin Blue.
First Aid Measures : In case of contact, immediatly flush eyes with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes.

Ensure adequate flushing of the eyes by separating the eyelids with fingers.

If inhaled, remove to fresh air. If required give artificial respiration.
If breathing is difficult give oxygen. If swallowed, wash out mouth with water, provided person is conscious, call a physician.

2) CYCLOHEXYL AMINO PROPYLAMINE
Synonyms : 3 Amino-1 cyclohexylamaminopropane
N-Cyclohexyl-1, 3 propanediamine
Emperical Formula : C9H20N2
Structural Formula : C6H5-NH-CH2-CH2-CH2-NH2
CAS No. : 3312-60-5
Molecular Weight : 156.3
Physical Properties : Appearance Colourless Liquid with Ammonia Odour
Specific Gravity 0.88
Boiling Point 110 - 113 (13 mbar)
Freezing Point -18o C
Specifications : Purity by GC 99.0 % min.
Moisture by K. F. 1.0 % max.
Standard Packing (Kgs.) : 170
Applications : Expoxy Curing Agent
First Aid Measures : In case of contact, immediately flush eyes with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes.

Ensure adequate flushing of the eyes by separating the eyelids with fingers.

If inhaled, remove to fresh air. If required give artificial respiration. If breathing is difficult give oxygen. If swallowed, wash out mouth with water, provided person is conscious, call a physician.


3) DIMETHYL DIPROPYLENE TRIAMINE
 

Appearance : Transparent Liquid
Molecular Formula : CH3
-NCH2-CH2-CH2-NH-CH2-CH2-CH2-NH2
CH3
CAS No. : 10563-29-8
Odour : Ammonia Like
Specific Gravity : 0.82
Boiling Point : 125oC at 60 mm (approx.)
Freezing Point : Less than -50oC
Solubility in Water : Miscible
Flash point approx (o C)
: 48
Specification : Purity by GC 99.0% min.
Moisture by KF 1.0% max
Standard Packing (Kgs.) : 160
Application : Used as prepolymer hardner for epoxy resins which are resistant to acids and alkalies.

First Aid Measures : Skin Contact : Flood all areas of body that have contacted the substance with water. Don`t wait to remove contaminated clothing; do it under the water stream. Use soap to help assure removal. Isolate contaminated clothing when removed to prevent contact by other

Eye Contact : Remove any contact lenses at once. Immediately flush eyes well with water or normal saline for atleast 20 - 30 minutes. Seek medical attention.

Inhalation : Leave contaminated area immediately breathe fresh air. Proper respiratory protection must be supplied to any rescuers. If coughing, difficult breathing or any other symptoms develop; seek medical attention at once, even if symptoms develop many hours after exposure

4) B-Phenyl Ethyl Amine
 

Synonms: Benzene Ethane Amine
B-Amino Ethyl Benzene
Emperical Formula : C8H11N
Structural Formula : C6H5-CH2-CH2-NH2
CAS No. : 64-04-0
Molecular Weight : 121.2
Physical Properties : Specific Gravity 0.965 at 20oC

Vapour Pressures 86-87oC at 23mbar
194.5 -195oC at 1 atm

Solubility Water,Methanol,
Isopropanol and Butanol
Specifications : Purity by GC 99.0 % min.
Moisture by K. F. 1 % max.
Standard Packing (Kgs.) : 200
Applications : Used in the manufacture of Phenformin, Glimeparide, Glipizide and Glibenclamide which are Anti-Diabetic Drugs.
First Aid Measures : In case of contact, immediately flush eyes with copious amounts of water for at least 15 minutes while removing contaminated & clothing and shoes.

Ensure adequate flushing of the eyes by separating the eyelids with fingers.

If inhaled, remove to fresh air . If required give artificial respiration.
If breathing is difficult give oxygen . If swallowed wash out mouth with water, provided person is conscious. Call a Physician.